top of page
Search
efanvisonssurna

Component Video Adapter For Mac



That seems to be the only way I could capture components and RGB video in the right number of colors. And I heard there was some bugs about analog video going through HDMI which is causing my workaround to be blocked.


Thanks for that info and for choosing the Apple Support Communities. If we understand correctly, you are trying to capture external video on your Mac. After doing a search, we were able to find a couple of Mac supported capture cards so please see if you can find a capture card that meets your needs in these links:




Component Video Adapter For Mac



Thanks but I noticed the ones you showed me where either HDMI or the yellow composite video or the 4 pin s video. I'm looking for the red green and blue type of video with either the red and white audio, or toslink or coaxial digital audio. I would prefer 240 YCbCr, but can work with SCART RGB.


I have a strange cord that has a male 3.5mm headphone jack on one side, and some component video and audio outputs on the other. When I plug the headphone side into my computer, and the other side into my TV, I get audio across the cable, but no video. How can I send some video over the headphone jack in OS X? I know you can, because this cable is actually for a Beyblade toy and it somehow transferred video over this cable.


The cable has a third terminal on the jack that is for a video signal. I have the same thing and use it with my Zune whenever I'm traveling or at a friend's house. Your audio port on your computer is likely not going to have a video signal coming out so video to a tv will be the s-video or vga route.


Well you would have to have some device that used the same method to transfer video. That cable is just using one of the possible 3 channels on that cable for video. It still works for audio because it is using the other 2 channels like standard left and right channels of audio.


This is not a set standard that you will commonly find on 99% of computers. That cable will work with the orginal device it came with and maybe a few other devices that used that method of video transfer (Certain models of the iPod photo and video used this method to transfer audio and video through a 3.5)


Video signal usually come from graphics card (or motherboard if built in) on your computer, it might have one RCA connector for video signal (Composite Video). It usually have DVI and/or VGA connector (usually for monitors, but modern TV's might have VGA or HDMI), and sometimes HDMI (there are DVI/HDMI adapters to buy)


Due to having to support headphones and video over the same jack the pin outs are non-standard. Swap the red and yellow connections on the TV to get correct video and stereo sound. (Cables purchased from Apple for this purpose are marked correctly for the iPod.)


[third-party] cables are not interchangeable with the Apple A/V cable for use with the iBook (FireWire) or iBook (Dual USB). Using a third-party cable with these computers will likely result in a distorted audio signal and no video output to the external monitor.


Most adapters have an extra Lightning connector or 30-pin Dock connector, so you can charge your iOS device while connected to a secondary display. Just connect a Lightning to USB or Dock Connector to USB to the adapter. Then plug the USB connector into a power source.


Make sure that you're using a Digital AV adapter (which has an HDMI port). If you're using a VGA adapter, it doesn't carry audio signals. To hear audio with a VGA adapter, you need to connect to the headset jack on your TV, monitor, projector, or stereo.


MAC Products is your source for mass transit power distribution accessories, components and systems. We offer a full line of products and services designed to meet the varied needs of transit systems operators, OEMs, repair shops and associated operations. We build electromechanical devices for rapid transit and locomotive propulsion systems.


Apple formerly sold the headphone-jack iPod AV Cable as a standalone $20 cable or as part of the $99 iPod AV Kit that also included a Dock, power adapter, and remote. Alternatively, third party cables could extract composite video either from the headphone jack or the Dock Connector. With the removal of composite video from the headphone jack of all 2007 iPhones and iPods (a move explained below), Apple now sells two cable packages, both of which use the iPods' Dock Connector:


The new cables are longer, and rather than providing three short leads that split off for stereo audio and video like the old iPod AV Cable (below, right side), the new cables split in three directions: USB, video, and stereo audio jacks (below, left side). This is an improvement in that it allows the cable to be used in applications where the video jack isn't right next to the audio jacks, such as would be the case if you wanted to plug the video directly into the TV but route the audio into a stereo receiver more than a few inches away. This design also results in a longer and more complex cable. The component version of the new cable kit is identical apart from having three video plugs rather than just the one on the composite cable pictured below.


Each package includes the audio/video cable with an integrated USB connector (above) and a wall adapter for powering the connected device while using it for video output. This is useful because playing video requires enough processing power to drain the battery rapidly. Because the cable plugs into the Dock Connector, it is essential to build USB into the cable because otherwise there'd be no way to charge it while using it for video; the old headphone cable could optionally be used alongside a USB to Dock Connector cable for power.


Both packages are identically priced at $49.00, which is higher than the old headphone-style cable by itself, but seems reasonable given that it includes a power adapter and is a more complex cable. Apple sells an additional package including a remote and dock, also priced at $49. For users who want video output but don't need a dock, this new packaging offers more flexibility than the old package.


In comparison, Microsoft's Zune Home AV kit bundles a remote control and a dock with a USB and video cable and costs $99, just like Apple's old kit. The Zune models do not support higher quality component video output, and the cable kit only works with Microsoft's hard drive players. The flash RAM based Zune 4 and Zune 8 (comparable to the iPod Nano) lack any video output features at all, as noted in the in depth comparison Winter 2007 Buyer’s Guide: Microsoft Zune 8 vs iPod Nano.


The cable and wall adapter are bundled into hermetically sealed white pouches (below top). The only difference between the two kits is the extraction of different sets of signals from the Dock Connector (below bottom), a difference detailed below. Only the iPhone and Fall 2007 iPods support the new component video. However, the simpler composite version of the cable will also work with both the new iPods and iPhone as well as all earlier iPods with support for video output.


The cables themselves have a couple of irritating qualities. Like the previous iPod AV Cable, the RCA connectors are strangely long, and only color coded on the back side of the jack. This makes it harder to match up cables to ports hidden on the back of a TV, particularly if things back there are cramped and poorly lit, as is often the case. The new cables also seem thin near the video connectors, especially since the RCA jack has a funneled recession where the wire enters. This feels like a weak link. While I didn't have any problems plugging cables in or yanking the wire out of the connector, a more standard looking reinforced, ruggedized connector would seem to make more sense than the fancy but impractical looking jacks Apple chose to use on this utilitarian cable.


After Apple introduced the video output changes on new iPods this year, but before it delivered the actual cables, there was a spark of a protest over the use of "authentication chips" to regulate which video output accessories the latest iPods would work with. In reality, those fears of "cable lock down" were invented by conjecture and were simply wrong: there is no controlling chip to worry about. As it turns out, the simplest conspiracy theory is not always the most accurate.


The original iPod AV Cable plugged into the iPod Photo's headphone port, but rather than using just three conductors like a typical headphone jack (right, left audio and ground) it used a fourth to provide composite video output. The other end of the cable plugged into a TV using three standard RCA cables: right and left stereo audio and a composite video connector.


This made the iPod AV Cable similar to many camcorder cables, which also package audio and video into a small headphone jack using four conductors. However, Apple's iPod headphone jacks had to remain compatible with standard headphones, so Apple reversed the odd pin order used by camcorder makers to deliver a headphone jack that worked fine with regular headphones, but could also deliver video output when used with the iPod AV Cable. Camcorder cables could be used by simply reversing the order that the RCA connector ends are plugged into on the TV side. This "change" resulted in some minor rumblings about how Apple was trying to put camcorder cables out of business or lock users into its own $20 cable, but were minor in comparison to the latest dustup over Dock Connector cables.


Since the same video signal was also available on the Dock Connector, users could alternatively plug the iPod Photo into a Photo Dock and then plug the iPod AV Cable into the dock's headphone port. That dock, later named the iPod Universal Dock, also supplied a S-Video connector. Essentially, it routed the video signals from the Dock Connector on the iPod out to both the headphone jack and to the S-Video connector (below). This required two different sets of video output signals, carried on different pins of the Dock Connector:


Shortly before the release of the 5G iPod in 2006, Apple designated the iPod Photo as the "iPod (with color display)." The new 5G iPods debuted with the same video output features, but now delivered the capacity for full video playback rather than just photo slideshows. 2ff7e9595c


0 views0 comments

Recent Posts

See All

M.ome.tv apk

M.Ome.TV APK: uma alternativa de bate-papo por vídeo para usuários do Android Você está procurando uma maneira divertida e fácil de...

Comentários


bottom of page